Status Summary Chart

Overview

The Equipment Status Summary chart displays the percentage of time that each piece of equipment has been in each status for the time frame selected. The Equipment can be selected by User Groups, Company Groups, or by the Equipment. User or User Groups can also be defined. When displaying the result the statuses can be shown for individual equipment or by the selected group type.

Required and Optional Information

A time frame and one or more pieces of equipment are required to generate the chart. By default, Today is selected for the time frame. Once the equipment has been selected the chart can be generated without specifying any additional information by selecting the Chart button in the upper right hand corner. Additional optional information can be selected by pressing the Next button.

Additional filters can be used to select the type of statuses to be compared. By default the General status is selected. This section also allows you to filter by part number and work order if desired.

You can compare your summary charts by following reviewing the details here.

General and Specific Status

For the Cycle status either an individual specific status can be selected or all of the specific statuses can be selected. As an example, let's assume there are two specific statuses in use, Machine Time and Spindle time. Machine Time has been setup to be active any time the equipment is running. Spindle Time has been setup be active only when there is a load on the spindle. By selecting Machine Time vs Spindle Time as the specific status the comparison chart will utilize the appropriate amount of time as the cycle time and therefore providing different results for the percentage of time the equipment has been in cycle.

For Planned and Unplanned Downtime either the General Status can be viewed or the General Status can be broken down showing each of the Specific Statuses.

Additional Options

Once a chart is generated a gear or Options button will appear in the upper right hand corner. These options will vary based on the chart generated, and these Options are not available on all charts, therefore at times the options panel will remain blank or unavailable.

This Additional Options panel also contains printing, viewing and exporting options for the generated chart.

An example when selecting the General Status for all of the status types. Each Status Type is displayed for each piece of equipment.	An example when selecting Machine Time for the Specific Cycle Status. The SRC 1 machine does not show since it was set to only collect General Cycle Time, not Specific Cycle Time. Note that in the case the Machine Time is equal to the General Cycle time in the previous chart. This makes sense since we defined Machine Time as anytime the Machine is running.


An example when selecting Spindle Time for the Specific Cycle Time. Note that now the amount of cycle time has decreased and the overall percentages of the other status types has increased.	An example when selecting the General Status for Unplanned Downtime, All Specific Statuses for Cycle Time and Planned Downtime. The Cycle Time and Planned Downtime are now broken down to show the detail of each of the Status Types.


An example when selecting Specific Statuses for Unplanned Downtime.	An example when all Specific Statuses are selected for all of the Equipment Status Types.